Steps in a demolition recommended by DCI.BZ Demolition Company

Posted by Dci Demolitions on 1:51 PM with No comments
We at DCI Demolition Before beginning demolition activities, there are many steps that must be performed - including but not limited to conducting asbestos abatement, removal of hazardous or regulated materials, obtaining the necessary permits, submit the relevant notifications, turn off utilities, rodent bait, and the development of site-specific safety and work plans.

In DCI. The demolition of a typical building is carried out as follows:


Hydraulic excavators can be used to shoot down one or two floors of buildings by a process of weakening. The strategy is to undermine the building, while the control of the shape and direction in which it falls. The project manager / supervisor will determine where demolition is necessary so that undermine a building is pulled into the desired shape and direction. The walls are typically undermined at the base of a building, but this is not always the case if the building design dictates otherwise. Considerations of safety and cleanliness are also taken into account in determining how the building and finally demolished is undermined. Hoe rams are typically used to remove concrete road deck and piers for bridge demolition while hydraulic shears are used to eliminate the structural steel bridge.


In some cases a crane with a wrecking ball used to demolish the structure down to some manageable height. At that point of weakening is carried out as described above. However Boom rare demolition balls are then used in demolition due to the uncontrollable nature of the rolling ball and the associated security implications.

Excavators high reach demolition are used most frequently for tall buildings where explosive demolition is not appropriate or possible. Excavator cutting attachments are typically used to dismantle structural steel elements. The hammers are often used for concrete structures and processing attachments concrete are used for crushing concrete to a manageable size, and to remove the rebar. For concrete building height, where neither explosive or high demolition range with an excavator is safe or practical, the method of "inside out", whereby excavators remotely operated demolish the building from the inside, is used as maintaining the exterior walls of the building as a scaffold, as each floor is demolished.

Dust control, fire hoses are used to maintain a wet demolition. Hoses can be acquired by workers insured fixed location, or attached to the lifts to gain height.

Chargers and can also be used bulldozers to demolish a building. Usually they are equipped with "rakes" (thick pieces of steel that could be a beam or pipe) used to ram the building walls. Skid loaders and loaders also be used to carry out and arrange steel materials.

We at DCI Demolition protect the environment by controlling and making good use of the materials are destroyed. Visit us on www.dci.bz and find how to contact us